Race Street 1.101″ OD Beehive Springs; 1.640″ Installed Height; 24 Springs
Race Ready – The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts.
More Stability – Higher lift cams are a common choice for street/strip engine builds. COMP’s Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift.
Modern Performance + Vintage Iron – COMP’s Race Street Springs are available in installed heights from 1.640″ – 2.000″ and . O.D.’s from 1.101″ to 1.590″, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
$380.48
Race In a position – The COMP Cams Race Side road spring line is designed to deal with race-orientated hydraulic flat and curler camshafts.
Extra Steadiness – Upper carry cams are a commonplace selection for Side road/strip engine builds. COMP’s Race Side road line accomodates engine builds that see each Side road and monitor use, a great deal improving Efficiency at Upper RPM and valve carry.
Brand new Efficiency + Antique Iron – COMP’s Race Side road Springs are to be had in put in heights from 1.640″ – 2.000″ and . O.D.’s from 1.a hundred and one” to 1.590″, making them perfect for a variety of Brand new heads and OE iron heads. Simply fit your spring pocket measurements to the proper spring base OD, then take a look at the spring max carry towards your valve carry to make sure a just right spring on your heads.
Ford 3V – The Race Side road 26125 Beehive Valve Spring drops proper onto Ford 3V engines. Expanding valve carry capability, spring fee and valve keep watch over, the 26125 spring prepares your Modular engine for a cam switch.
Made in USA
Specification: Race Street 1.101″ OD Beehive Springs; 1.640″ Installed Height; 24 Springs
|
There are no reviews yet.