fbpx

1:12 Scale Large US Military Truck 2.4G fessional Remote Control Car 8WD Strong Horsepower Off Road RC Army Vehicle…

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Make sure this fitsby entering your model number.
★Vehicle 1:12 full-scale high simulation model; 8×8/8-wheel full-time drive, 550-large torsion motor (3660 brushless motor) using planetary gear drive structure, the first four rounds adopt wire rope pulling structure to realize four-wheel synchronous steering.
★The two sides of the door can be opened, with the compartment type can carry weights up to 10KG, the rear side panels of the car can be fully opened, the aluminum alloy of the body of the bucket, the chassis structure of the vehicle is made of zinc alloy material.

$2,355.99

Category:
Color:Green

We have always been committed to providing users with quality ducts. If you have any questions, please contact us in time, we will help you as soon as possible within 24 hours.
Brand:
Ducting Information:
Motor: high torque brush class 550 motor / brushless motor 3660
Governor: independent electronic governor 320A / Brushless ESC 60A
Car ducting specifications: 739.5 × 218.5 × 242 mm (L × W × H)
Battery: 7.4V 3000mAh Li-ion battery
Wheelbase: (128 mm) × 258 mm × (128 mm).
Frequency: 2.4G HZ Wheel Margin: 218 mm. Wheel diameter: R111 mm.
Remote control distance: about 80m
English box packaged, EPP double open inner box (with laptop)
Remote control category: large-scale synchronous control system (weapon control) four channels
Color box specifications: 78 × 30 × 28 cm (L × W × H)
Specifications of the outer box: 93 x 29.7 x 3.2 cm.
Remote control battery AA 4 x 1.5 V (without delivery).
Weight: 13.5 kg.
Key function:
1, low voltage alarm; 2, high temperature shutdown key; 3, voltage regulation 15A
Speed: 12 km / has low speed; 18 km / ha high speed.
Material: hardware, zinc alloy, electronics, plastic

Duct performance parameters:
1. The maximum climbing angle: low speed 35°; high speed 15°.
2. Maximum wading depth: 55 mm.
3. Maximum load: 10 kg.
4. Minimum turning radius: about 1m
5. The maximum width of the slot: 180 mm.

Make sure this fitsby entering your model number.
★Vehicle 1:12 full-scale high simulation model; 8×8/8-wheel full-time drive, 550-large torsion motor (3660 brushless motor) using planetary gear drive structure, the first four rounds adopt wire rope pulling structure to realize four-wheel synchronous steering.
★The two sides of the door can be opened, with the compartment type can carry weights up to 10KG, the rear side panels of the car can be fully opened, the aluminum alloy of the body of the bucket, the chassis structure of the vehicle is made of zinc alloy material.
★Maximum climbing angle: 35° at low speed; 15° maximum wading depth at high speed: 55mm. Minimum turning radius: about 1 meter, spring steel plate shock absorber + teles double shock absorption.
★Maximum groove width: 180mm, adjustable secondary mechanical gear position of the central transmission (remote adjustable), variable stroke CVD ball type universal joint shaft, front and rear independent link type bridge system, front and rear axles with tapered gears High load reduction transmission structure.
★This remote-controlled toy can greatly develop children’s hands-on ability, it is undoubtedly the best holiday gift for adults or children. Don’t hesitate, take it home now!

Specification: 1:12 Scale Large US Military Truck 2.4G fessional Remote Control Car 8WD Strong Horsepower Off Road RC Army Vehicle…

Manufacturer
Brand

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “1:12 Scale Large US Military Truck 2.4G fessional Remote Control Car 8WD Strong Horsepower Off Road RC Army Vehicle…”

Your email address will not be published. Required fields are marked *

Offroadbargains
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare